Loading ...
Loading ...
Loading ...
-32- -33-
Lid and Sealing Gasket
Always examine the gasket before each use. The silicon
Sealing Gasket on the inside of your Multi-Cooker Lid
may deteriorate over time. Remove Sealing Gasket for
cleaning as needed. Hand clean using warm, soapy water,
dry thoroughly, and replace Sealing Gasket in Lid before
use. Leave the Lid upturned for storage, as this will also
extend the life of the gasket. Sealing Gasket may need to
be replaced every 1 – 2 years depending on regular use.
Contact Crock-Pot
®
customer service to order replacement
parts.
Steam Release Valve
Ensure the Steam Release Valve is clear from debris before
you begin using the Multi-Cooker. Remove the valve and
gently clean. Ensure it is completely dry before replacing.
Steam Release Valve Cover
The Steam Release Valve Cover is on the underside of the
Lid. Ensure it is clear from debris before you begin using the
Multi-Cooker. To clean, carefully pull the cover off and clean
using warm, soapy water. Press the cover back into its place
after cleaning is complete.
UNDERSIDE OF LID
Bobber Valve
Gently press the valve up and down 2-3 times and ensure it
is clear from debris before you begin using the Multi-Cooker.
Lid Lock Pin
Gently press the pin and ensure it is clear from debris before
you begin using the Multi-Cooker.
Note:
1. Condensation may collect inside the Heating Base under
the removable Cooking Pot. This is normal. Allow to
cool, and then dry using kitchen cloth.
2. Always make sure that each component (pot, valves,
gasket, etc.) is completely dry before you put back into
the Multi-Cooker.
Figure 6
CARE AND CLEANING (CONT.) CARE AND CLEANING (CONT.)
Bobber Valve
Steam Release Valve
Cover
Loading ...
Loading ...
Loading ...