Remington REM-L240BNO-V User’s Manual and Operating Instructions

Loading ...

Care and Maintenance (cont.)

Note: Only a qualied service person should clean the venting system and the solid fuel-burning replace.

At the beginning of each season, check the system as follows:

1. Check the chimney ue/vent pipe to ensure that the ue is drawing properly. This also checks if the vent

pipe connections are tight.

2. Check that the chimney/vent termination has no blockages.

3. Check the chimney and/or vents for creosote and soot build-up. Clean if necessary.

4. If applicable, inspect the burners and pilot.

The burner system has been previously adjusted for proper operation at the factory. No adjustment is nec-

essary, other than altitude de-rating or pilot ame. De-rating for altitude should be performed by a qualied

service person.

SOOTING AND CLEANING LOGS

Some sooting of the appliance is normal, which adds to the appearance of real burned wood. If excessive

sooting occurs and accumulates, the logs can be cleaned using either of the following options:

A. Spray the logs with clean water while they are hot and burning. The soot will burn and lift o.

B. Brush the soot o with a sti brush while the logs are cool. While using a brush, do not use water or soot cleaners.

ACCESSORIES

Purchase these replace accessories from your local dealer. If they cannot supply these accessories, contact

the Pinnacle Climate Technologies customer service department at (866) 676-1636. for more information.

NOTE: Moisture may cause the granules and Glowing Embers in your burner pan to settle. To return the

ame to its original condition and improve the burn, follow these tips:

A. Settling of Vermiculite: With a screwdriver or at-blade knife, carefully stir the granules to loosen the

material. Clean any spills.

B. Embers: Break up any clumps. Inspect the control and pilot to be sure they are clear of dirt, lint, or other debris.

Safety Pilot/LP Conversion Kit (REM-LPK100A)

Required for propane/LP installation.

Vermiculite (REM-VER100A)

Helps spread gas evenly throughout

the burner pan, creating a fuller ame

pattern. Also doubles as an ash bed.

Lava Rock (REM-LAV100A)

Adds to the appliance’s realism by creat-

ing a realistic-looking rock bed for vented

or vent-free gas logs. Can be used as a

replacement or for rst-time use.

Glowing Ember Fibers (REM-GLW100A)

Imitates a glowing bed of ashes found in

a wood-burning re, which adds to the

realism of the appliance.

Loading ...

Remington REM-L240BNO-V 24-in 55000-BTU Pan-Burner Vented Gas Fireplace Logs