Remington REM-L240BNO-V User’s Manual and Operating Instructions

Loading ...

Care and Maintenance (cont.)

BURNER FLAME PATTERN

Figure 18 shows a correct burner ame pattern, and Figure 19 shows an incorrect burner ame pattern. The

incorrect burner ame pattern results in irregular burning ames. A correctly burning ame will not be dark

or have an orange/reddish hue.

Note: When using the appliance the rst time, the ame will be orange for about one hour until the log cures.

Do the following if the burner ame is incorrect:

1. Turn o the appliance (see TO TURN OFF GAS TO THE APPLIANCE, page 13).

2. See the TROUBLESHOOTING GUIDE, page 17.

Fig. 18—Correct Flame Pattern (Short Flames) Fig. 19—Incorrect Flame Pattern (Tall Flames)

2–6 inches

above logs

6–12 inches

above logs

BURNER ORIFICE HOLDER AND PILOT AIR INLET HOLE

The primary air inlet holes provide the proper amount of air for mixing with the gas, which creates a clean

burning ame. These holes must be kept free of lint, dust, dirt, pet hair, and other debris. Before each heat-

ing season, clean these holes—blocked air holes create soot. The appliance should be cleaned approximate-

ly every three months during operation and inspected yearly by a qualied service person.

During operation, keep the vicinity of the appliance clear of debris, which may create a hazard.

Keep the burner tube and pilot assembly clean and free of dust, dirt, lint, and other debris. Use compressed

air of 30 PSI or less to clean these parts. Follow all the directions on the packaging/can when using com-

pressed air. Improperly using compressed air may damage the pilot assembly.

Loading ...

Remington REM-L240BNO-V 24-in 55000-BTU Pan-Burner Vented Gas Fireplace Logs