Loading ...
Loading ...
Loading ...
37
CARE AND MAINTENANCE
To replace the grill burners after cleaning
1 With the burner held at a 45 degree angle front to back, lower
each grill burner back into place, ensuring that the burner inlet
is centred on the injector inside the valve hole in the front (Fig.
32 & 33), and that the burner slides into the collector box on
the side, as shown in Fig. 34.
2
With the burner inlet and side properly in place, locate the
tabs at the rear of the burner into the matching slots on the
support bracket. Check that the burner is level and does not
rock.
3 Refit the clamps and fixing screws to secure the burner in
place.
4 Light all the burners and check for proper flame
characteristics. If adjustments are necessary, refer to the
‘Burner adjustment’ page in the ‘Installation’ section.
5 Once you have verified that the burners function correctly,
replace the grease shields, radiant trays, and grill grates.
IMPORTANT!
Centre the burner onto the orifice properly before lighting the grill to prevent fire hazard or explosion.
KNOB CONTROL
VALVE
BURNER
VENTURI
VALVE
PANEL
⁄
”
MIN
Fig. 32 Fig. 33
Fig. 34
REMOVE DRIP PAN TO VIEW CONNECTION
Burner alignment
COLLECTOR BOX BURNER INLET
Loading ...
Loading ...
Loading ...