Loading ...
Loading ...
Loading ...
12 13
Owner’s ManualOwner’s Manual
ADDITIONAL SAFEGUARDS ADDITIONAL SAFEGUARDS
1. If you cook meat with skin, such as sausage, swelling can occur when cooked
under pressure. Piercing skin after cooking can lead to bursts of hot liquid.
2. Do not lean over the Nutri-Pot at any time while cooking.
3. The Nutri-Pot should not be used for any medical purpose. It is not designed
to reach the required temperature for sterilization.
4. The Silicone Gasket creates a pressure seal between the lid and pot. Keep
the Gasket completely clean and free from any cracks or deterioration.
5. It is extremely important to ll the Nutri-Pot with liquid prior to operation.
Never cook without liquid as doing so can cause it to overheat and damage
the safety mechanisms. In case of overheating, never remove the Nutri-Pot
from the heat source. Instead, shut it off immediately and let it cool.
6. Make sure all parts of the pressure regulator and ventilated pipe are clean
and properly assembled.
7. Do not alter the safety mechanisms or attempt to repair the Nutri-Pot as
this will void the warranty. Please adhere to the “Care and Maintenance”
instructions specied for use.
8. Use only the appropriate replacement parts from NuWave to maintain proper
functionality and safety. Visit www.nuwavenow.com for replacement parts
and pieces.
9. Do not place the unit close to ammable materials and heating units
or wet environments.
10. Height of ingredients that is to be put into the Inner Pot should comply with
“Operating Instructions” section.
11. Do not break the Silicone Gasket. Do not replace it with other rubber
gaskets, nor use a tension belt to make it seal.
12. Check and clean the anti-clog lter and Pressure Release Valve regularly to
avoid being blocked.
13. Do not open the Lid when the Floater Valve or Pressure Indicator is up.
14. Do not put anything on or use other objects to replace the Pressure
Release Valve.
15. Never use a towel to clog the gap between the Lid and the edge of the Base.
16. The bottom of the Inner Pot and heating plate should be kept clean. Do not
put the Inner Pot on other heat sources. Do not replace the Inner Pot with
other containers.
17. Only use wood or plastic ladles and spoons so as not to wear the non-stick
coating in the Inner Pot.
18. Do not attempt to move the unit while cooking. Only after the unit cools down
completely can it be moved. Move the unit using the Base’s handles. Do not
try to hold and move from the Lid handle.
19. Do not disassemble on your own or try to replace with any parts that are not
manufactured by NuWave for the Nutri-Pot.
20. Make sure the steam pressure discharges completely before opening the Lid.
21. Fit on the Water-Collection Box before use.
22. Contact our Customer Service Department at 1-877-689-2838 or via
email at help@nuwavenow.com for the following:
• If the main power cord is damaged.
• In case the unit emits a continuous amount of smoke while in use. It is
normal for some smoke to escape the appliance during the rst few uses.
CARE & MAINTENANCE
• Unplug the NuWave Nutri-Pot and let it cool before cleaning.
• Wipe the Base and inside of the Base, if necessary, with a clean
cloth. Do not immerse the Base in water or spray any water in it.
• Remove and clean the Water-Collection Box. Wipe with a wet cloth
and insert it back to the Base of the Pressure Cooker.
• The Lid can be detached from the Base. See “Silicone Gasket
Installation.” All parts inside the Lid can be hand-washed
separately with water and should always be checked to make
sure they are not damaged or cracked.
• Use a sponge or non-metallic soft brush to clean the Inner Pot,
and then wipe the surface with a clean cloth.
CARE & MAINTENANCE
Loading ...
Loading ...
Loading ...