Loading ...
Loading ...
Loading ...
18 19
Owner’s ManualOwner’s Manual
SAVE THESE INSTRUCTIONS
SILICONE GASKET INSTALLATION
MAKE SURE THE SILICONE GASKET HAS NO CRACKS OR IS IN
ANYWAY DAMAGED.
Remove Lid from the Pressure Cooker.
• Rotate counterclockwise; this will detach the Lid.
• With one hand holding the Lid down, gently pull the Silicone Gasket up
from the Inner Lid.
Installing the Silicone Gasket
• Line up the Silicone Gasket on top of the metal ring.
• Gently push the Silicone Gasket, making sure you see the metal ring is
inside the Silicone Gasket’s grove. Continue pushing the Silicone Gasket
all around.
1. Do not place the unit close to ammable materials, heating units,
or wet environments.
2. Height of ingredients placed in the Inner Pot should comply with the
directions listed under “Operating Instructions.”
3. Do not break the Silicone Gasket. Do not replace it with other parts that are
not designed specically for the Nutri-Pot.
4. Check and wash anti-clog lter and Pressure Release Valve regularly to
avoid blockage.
5. Do not attempt to open the Lid when the oater is down.
6. Do not put anything on or use other objects to replace the Pressure
Release Valve.
7. Never use a towel to clog the gap between the Lid and edge of Housing.
8. The cooking pot and heating plate should always be kept clean.
9. Do not put any other cooking pots on the heating plate. Do not replace any
parts with other containers.
10. Do not use metal or plastic utensils with the coated Inner cooking pot as this
can damage the surface.
11. Keep hands and face away from the venting outlet or where pressure is
being released.
12. Depending on the function, when cooking is complete, the Nutri-Pot will
automatically go to Warm Mode. Avoid letting ingredients sit in Warm Mode
for more than 4 hours as this could affect the taste.
13. If a lot of smoke is escaping from the lid during operation, unplug the unit
immediately and contact customer service.
14. Do not move the unit while in operation. Only after the Nutri-Pot has
completely cooled down should you attempt to move it. When moving the
Nutri-Pot, use the handles on the Base. Do not lift from the Lid.
15. If any troubles arise during operation, any necessary service must be done
by NuWave, LLC or authorized by the manufacturer for repairs.
16. Do not disassemble the unit on your own or replace any parts.
17. If the power cord is damaged, do not attempt to operate the unit.
Contact Customer Service Department at help@nuwavenow.com
for assistance.
18. Keep the unit out of reach of children when the unit is operating or cooling down.
19. Place the Water-Collection Box in the Nutri-Pot before every use. Make sure
it is always cleaned prior to cooking.
20. It is normal for some smoke to escape the unit when heating for the rst time.
SAVE THESE INSTRUCTIONS
Loading ...
Loading ...
Loading ...