Loading ...
Loading ...
Loading ...
22
Shut Down
1. Turn the control knob clockwise to PILOT. Normally, the burner will make a slight popping sound when
extinguished. The burner will extinguish but the pilot will remain on.
2. To extinguish the pilot, depress the control knob and continue to turn it clockwise to OFF.
3. Turn the cylinder valve clockwise to OFF and disconnect the regulator when the product is not in use.
NOTICE
After use, some discoloration of the emitter is normal.
Checklist
NOTICE
For a safe and pleasant heating experience, perform this check before use.
1. I am familiar with the entire owner’s manual and understand all precautions noted.
2. All components are properly assembled, intact and operable.
3. No alterations have been made.
4. All gas connections are secure and do not leak.
5. Wind velocity is below 10mph.
6. The product will operate at reduced efficiency below 41°F.
7. The product is outdoors, not inside any enclosure.
8. There is adequate fresh air ventilation.
9. The product is away from gasoline or other flammable liquids or vapors.
10. The product is away from windows, air intake openings, sprinklers and other water sources.
11. The product is at least 3.3ft (all sides including top) away from combustible materials.
12. The product is on a hard and level surface.
13. There are no signs of spiderwebs or insect nests.
14. All burner passages are clear.
15. All air circulation passages are clear.
16. Children and adults should be alerted to hazards of high surface temperatures and should stay away to avoid
burns or clothing ignition.
17. Young children should be carefully supervised when they are in the area of the product.
18. Clothing or other protective material should not be hung from the product, or placed on or near the product.
19. Any guard or other protective device removed for servicing the product must be replaced prior to operating the
product.
20. Installation and repair should be done by a qualified service person. The product should be inspected before use
and at least annually by a qualified service person.
21. More frequent cleaning may be required as necessary. It is imperative that the control compartment, burner and
circulating air passageways of the product be kept clean.
NOTICE
Perform this check after use.
1. The control knob at the control box (8) is in the OFF position.
2. The cylinder valve is OFF.
3. The gas hose is disconnected.
WARNING
Risk of injury! Do not touch or move the product for at least 45 minutes after use. The reflector is
hot to the touch. Allow the reflector to cool before touching.
Cleaning and Maintenance
Cleaning
• Use warm soapy water for cleaning. Never use flammable or corrosive cleaning agents.
• While cleaning the product, keep the area around the burner and pilot assembly dry at all times.
• Do not submerge the control valve assembly. Do not use the control box (8) if it was submerged in water. The
control box must be replaced.
• Keep the product area clear and free from combustible materials, gasoline and other flammable vapors and liquids.
• Do not obstruct the flow of combustion and ventilation air.
• Keep the ventilation opening(s) of the cylinder enclosure free and clear from debris.
Loading ...
Loading ...
Loading ...