Loading ...
Loading ...
Loading ...
8
11. Enjoy your first cup of Keurig Brewed
®
gourmet coffee, tea or hot cocoa!
NOTE: After brewing a hot cocoa K-Cup
®
pack, we recommend running a hot
water brew cycle without a K-Cup
®
pack.
12. The red HEATING Light may be illuminated as the water is heated for
the next brew cycle. The brewer will be ready for use in approximately
15 seconds. NOTE: During this period, your brewer will prepare for the next
brew. The pump may make a vibrating sound. This is normal.
Stopping the Brew Process
If you need to stop the brewing after the process has started, press the
POWER Button to turn the brewer off. The flow of coffee, tea or hot cocoa
will stop, the heating element will shut off and the green POWER Light will
turn off. NOTE: You may get less coffee, tea or hot cocoa in your cup during
your next brew. We recommend that you perform a cleansing brew after a
terminated brew. Then your next brew will be the proper volume.
SECTION 1 Set-Up & First Brew
adding Water
The blue ADD WATER Light will illuminate when
the water level in the Water Reservoir is low or if
the Water Reservoir has been removed (fig. 7).
The brewer will not allow you to brew when the
blue ADD WATER Light is illuminated.
The Water Reservoir can be filled in two ways.
1. Remove the Water Reservoir Lid and pour water
directly into the Water Reservoir while it is still
attached to the brewer. Fill with bottled or filtered
water. The water level should reach the line just
below the top edge of the clear viewing area.
Do not overfill. Replace the Water Reservoir Lid.
2. Remove the Water Reservoir from the brewer by
first removing the Water Reservoir Lid from the
Water Reservoir, then lifting the Water Reservoir
straight up and away from the brewer. Fill with
bottled or filtered water. Place the Water
Reservoir back on the brewer and ensure the
Water Reservoir Lock Tabs engage with the
brewer. Replace the Water Reservoir Lid on the
Water Reservoir. IMPORTANT: Do not remove the
Water Reservoir during the brewing process.
The blue ADD WATER Light will no longer be
illuminated three seconds after installing or
refilling the Water Reservoir. This delay is normal.
P
U
S
H
T
O
B
R
E
W
BREW
AUTO-OFF
POWER
DRAIN BREWER
HEATING
DESCALE
ADD WATER
fig.
7
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...