Loading ...
Loading ...
Loading ...
Installing the Screw-Down Ball Mount on the Dashboard
Before you can attach the screw-down ball mount to your dashboard, you must select a suitable location on the
dashboard and purchase the appropriate hardware for your mounting surface.
WARNING
It is your responsibility to ensure the mounting location complies with all applicable laws and ordinances, and
does not block your view of the road during the safe operation of your vehicle.
NOTICE
Avoid wires, gauges, air bags, air bag covers, HVAC, and other items when drilling pilot holes and attaching the
mount to the vehicle. Garmin is not responsible for any damages or consequences arising from the installation.
NOTICE
Garmin recommends professional installation of the screw-down ball mount.
The device includes an optional 4-hole AMPS pattern mount that you can secure to the dash board in place of
the suction cup. This can be useful if you are unable to mount the device to a windshield.
1 Place the mount on the selected location.
2 Using the mount as a template, mark the four screw locations .
3 If necessary for your mounting surface, drill pilot holes.
NOTE: Do not drill through the mount.
4 Securely fasten the mount to the surface using M4 or #8 screws suitable for your mounting surface.
8 Installation
Loading ...
Loading ...
Loading ...