Loading ...
Loading ...
Loading ...
E 29
CLEANING AND CARE
MICROWAVE OVEN LIGHT
1. Disconnect power to the oven at the circuit breaker
panel or by unplugging.
2. Remove 3 screws that secure louver.
3. Remove louver by gently moving louver and pull away
from unit.
4. Pull the louver away from the oven and remove char
-
coallter,ifused.
5. Slide the light cover forward and lift up.
6. Remove old light bulb and replace only with an equiv
-
alent watt bulb available from an Authorized Servicer
or parts distributor. Bulbs are also available at most
hardware stores or lighting centers. DO NOT USE A
BULB LARGER THAN 30 WATTS.
7.Replacetheovenlightcoverandcharcoallter,ifused;
push louver back in place (engaging both the bottom
and top tabs) and replace the louver mounting screws.
Screw
Top tab
Charcoal filter
Screw
Screw
Oven light
Louver
Bottom tab
SERVICE CALL CHECK
Please check the following before calling for service:
1. Place one cup of water in a glass measuring cup in the microwave oven and close the door securely.
Operate the microwave oven for one minute at HIGH 100%.
A. Does the microwave oven light come on? YES ___ NO ___
B. Does the cooling fan work? (Put your hand over the top ventilation openings.) YES ___ NO ___
C. Does the turntable rotate when the TURNTABLE ON/OFF pad is touched and
TURNTABLE ON is in the display? (It is normal for the turntable to turn in either
direction when TURNTABLE ON is in the display.)
YES ___ NO ___
D. Is the water in the oven warm? YES ___ NO ___
E. Does “H” appear on the display when fan is manually turned on? YES ___ NO ___
2.Removethewaterfromtheovenandprogram:CONVEC,450˚F,
500, START/TOUCH ON
A. Do CONV and COOK light? YES ___ NO ___
B. After the oven shuts off, is the inside of the oven hot? YES ___ NO ___
If “NO” is the answer to any of the above questions, please check electrical outlet, fuse and/or circuit breaker.
If either or both are not functioning properly, CONTACT YOUR NEAREST AUTHORIZED SERVICER.
A microwave oven should never be serviced by a “do-it-yourself” repair person.
Note: If time appearing in the display is counting down very rapidly, check Demonstration Mode on page 26 and cancel.
Loading ...