Loading ...
Loading ...
Loading ...
226
9
08
Each press of the button, located at the end of the
wipers stalk , permits displaying of the different trip
computer data in succession, depending on the
display.
- the "vehicle" tab with:
the range, the current consumption and the distance remaining to the
destination,
- the "1" tab (route 1) with:
the average speed, the average consumption and the distance travelled
calculated over route "1" ,
- the "2" tab (route 2) with the same characteristics for a second route.
A FEW DEFINITIONS
Range:
displays the distance which can travelled with the remaining fuel
detected in the tank, basd on the average consumption over the last few
miles (kilometres).
This displayed value may vary signifi cantly following a change in
the vehicle speed or the relief of the route.
When the range falls below 20 miles (30 km), dashes are displayed.
After fi lling with at least 10 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (100 km).
If, whilst driving, dashes are displayed continuously in place of the digits,
contact a PEUGEOT dealer.
Current fuel consumption:
only calculated and displayed above 20 mph
(30 km/h).
Average fuel consumption:
this is the average fuel consumption since
the last trip computer zero reset.
Distance travelled:
calculated since the last trip computer zero reset.
Distance remaining to the destination:
calculated with reference to
the fi nal destination, entered by the user. If guidance is activated, the
navigation system calculates it as a current value.
Average speed:
this is the average speed calculated since the last trip
computer zero reset (ignition on).
Zero reset
When the required route is displayed, press the control for more
than two seconds.
TRIP COMPUTER
VEHICLE DIAGNOSTICS
Loading ...
Loading ...
Loading ...