Loading ...
Loading ...
Loading ...
10
10
PRACTICAL INFORMATION
114
Fitting a wheel
Position the wheel.
Tighten the bolts by hand.
Partly tighten the bolts using the
wheelbrace.
Fold the jack 2 and remove it.
Fully tighten the bolts using the
wheelbrace 1 .
For vehicles with steel wheels, re-
fi t the wheel trim starting by plac-
ing its notch facing the valve and
press with the palm of the hand.
For vehicles with alloy wheels, refi t
the covers.
Put the tool holder back in position.
This helps to keep the boot fl oor in its
correct position, to prevent any de-
formation of the fl oor when loaded.
Tighten the spare wheel securing
strap to prevent noise and for your
safety in the event of impact.
Punctured tyre warning
lamp
Information on the instrument
panel:
Reminder: for your safety, always
change a wheel:
- on level, stable, non-slippery ground,
- with the parking brake applied,
- with fi rst or reverse gear engaged
(position P for the automatic gear-
box),
- never go underneath a vehicle
which is supported only by a jack.
Tyre under-infl ation detection
system warning lamp
These original equipment wheels are
fi tted with a pressure sensor (see
paragraph "Tyre under-infl ation detec-
tion"). The warning which detects the
removal or absence of a wheel fi tted
with the pressure sensor signals the
anomaly. Have the wheel repaired and
checked by a PEUGEOT dealer.
After changing the wheel:
- have the tightness of the bolts and
the tyre pressure of the spare wheel
checked as soon as possible.
- have the punctured wheel repaired
and refi t it to the vehicle as soon as
possible.
- have the spare wheel checked and
replace it in its boot recess.
Recommendations when using
the temporary spare wheel *
Your vehicle may be equipped with a
spare wheel with a different rim to that
of the standard wheel.
After use, replace it as soon as possible.
Follow the recommendations below
to avoid any alteration in vehicle han-
dling:
-
do not drive above 50 mph (80 km/h) ,
- do not fi t a wheel trim,
- drive carefully,
- check the infl ation pressure indicated
on the label.
* According to version and country.
Loading ...
Loading ...
Loading ...