Loading ...
Loading ...
Loading ...
3
4
4
60º
5
Inserting the door
1.
Hold the door on both sides at an an-
gle of approximately 60° (from the
side of the door with the handle).
2.
Push the door hinges at the same
time into the two recesses at the bot-
tom of the appliance on the left and
the right as far as they go.
3.
Shut the door only to a point of resist-
ance and then open it as far as it
goes.
4.
Lock the clamping levers on the hing-
es fully.
5.
Close the door.
12.5 Lamp
WARNING!
Danger of electrocution! Discon-
nect the fuse before you replace
the lamp.
The lamp and the lamp glass cov-
er can be hot.
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the
interior of the appliance. It pre-
vents damage to the lamp glass
cover and the cavity.
Always use the same lamp type.
Replacing the side lamp:
1.
Remove the left shelf support.
2.
Use a Torx 20 screwdriver to remove
the cover.
3.
Remove and clean the metal frame
and the seal.
4.
Replace the lamp with a halogen, 230
V, 25 W, 300 °C heat resistant oven
lamp.
5.
Install the metal frame and the seal.
Tighten the screws.
6.
Install the left shelf support.
13. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem Possible cause Remedy
The appliance does
not heat up.
The appliance is deactiva-
ted.
Activate the appliance.
The appliance does
not heat up.
The clock is not set. Set the clock.
The appliance does
not heat up.
The necessary settings are
not set.
Make sure that the settings
are correct.
The appliance does
not heat up.
The Child Lock is activated. Refer to "Activating and de-
activating the Child Lock
function".
ENGLISH 33
Loading ...
Loading ...
Loading ...