Loading ...
Loading ...
Loading ...
3.
Pull the support out of the rear catch.
Installing the shelf supports
To install the shelf support follow the pro-
cedure in the opposite order.
12.3 Steam generation system
CAUTION!
Dry the steam generator after
each use. Soak up water with the
sponge.
Remove the limescale residue
with water and vinegar.
CAUTION!
Chemical de-scaling agents can
cause damage to the enamel. Fol-
low the instructions of the manu-
facturer.
Cleaning the water drawer and the
steam generator:
1.
Put the water and vinegar mixture
(approximately 250 ml) through the
water drawer into the steam genera-
tor.
Wait for approximately 10 minutes.
2.
Remove the water and vinegar with
the sponge.
3.
Put clean water (100 - 200 ml) into
the water drawer to flush the steam
generation system.
4.
Remove water from the steam gener-
ator with the sponge and rub dry.
5.
Keep the door open to let the appli-
ance dry fully.
12.4 Removing / inserting the
door
Remove the door to clean the inner side
of the appliance.
WARNING!
Pull the door away from the appli-
ance. The door is heavy!
CAUTION!
Put the door with the outer side
down on a soft and level surface
to prevent scratches.
3
4
2
Removing the door
1.
Open the door as far as it goes.
2.
Lift up the clamping levers on both
door hinges fully.
3.
Hold the door on both sides with both
hands and close it approximately 3 /
4 of the way going through the point
of resistance.
32
www.electrolux.com
Loading ...
Loading ...
Loading ...