Loading ...
Loading ...
Loading ...
Australia
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
This shows the single-phase connection.
For connection to fixed wiring, i.e. flexible conduit,
remove the electrical terminal cover box on the back
panel. Remove two screws and blanking plate from
the bottom flange of the cover box, so as to allow the
conduit through.
Fix the conduit-to-conduit mounting bracket on the
back panel. Connect the mains cable to the correct
terminals for your electrical supply type. Check that the
links are correctly fitted and that the terminal screws are
tight.
Replace the electric terminal cover box, making sure
that the conduit is clear of the bottom flange.
Press the light switch in the main oven and check that
the light is working.
Check each burner in turn.
Each burner has an FSD (Flame Security Device) that will
stop the flow of gas if the flame goes out.
For each burner, press the ignition switch on the fascia
panel and push in and turn the knob to the solid flame
symbol ( ).
Keep holding the knob pressed in to let the gas through
to the burner for few seconds. If, when you let go of the
control knob, the burner goes out, then you have not
bypassed the safety device for initial ignition. Turn the
control to the off position and wait one minute, then try
again, this time holding in the control knob for slightly
longer.
Open the grill compartment door. Turn on the grill
control and check that the grill heats up.
Set the clock to the time of day. See 'The Clock' section
in the Users section of these instructions.
Turn on the ovens and check that the oven fans start to
turn. Turn off the ovens.
Loosen the three screws along the front bottom edge
of the cooker. Hook the central keyhole over the
central screw. Twist and fit each end keyhole over their
respective screws. Tighten the fixing screws.
Please complete your details in this Guide, make sure
that the user knows how to operate the cooker, and
hand over the Instructions.
Loading ...
Loading ...
Loading ...