Loading ...
Loading ...
Loading ...
EN
7
UPPER RACK
Load delicate and light dishes:-
glasses, cups, saucers, low salad
bowls.
The upper rack has tip-up
supports which can be used in a
vertical position when arranging
tea/ dessert saucers or in a lower
position to load bowls and food
containers.
(loading example for the upper rack)
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable aps can be positioned at three
dierent heights to optimize the arrangement of
crockery inside the rack.
Wine glasses can be placed safely in the foldable
aps by inserting the stem of each glass into the
corresponding slots.
For optimum drying results incline the foldable
aps more. To change the inclination, pull up the
foldable ap, slide it slightly and position it as you
wish.
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adju-
sted: high position to place bulky crockery in
the lower basket and low position to make
the most of the tip-up supports by creating
more space upwards and avoid collision
with the items loaded into lower rack.
The upper rack is equipped with a Upper
Rack height adjuster (see gure), witho-
ut pressing the levers, lift it up by simply
holding the rack sides, as soon as the rack is
stable in its upper position.
To restore to the lower position, press the
levers A at the sides of the rack and move the basket downwards.
We strongly recommend that you do not adjust the height of the
rack when it is loaded.
NEVER raise or lower the basket on one side only.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids
should ideally be placed at the sides to avoid interferences with the
spray arm.
The lower rack has tip-up supports which can be used in a vertical
position when arranging plates or in a horizontal position (lower) to
load pans and salad bowls easily.
(loading example for the lower rack)
GLASS CARE
Dedicated accessory that
allows you to safely store
dierent types of stem
glasses in the lower rack.
It enables cleaning &
drying results by allowing
an optimised and stable
positioning of the glasses.
POWER CLEAN IN LOWER RACK
Power Clean® uses the special water jets
in the rear of cavity to wash more inten-
sively the high dirty items.
Placing the pots/casseroles faced to the
Power Clean® component please activa-
te the POWER CLEAN on the panel.
The lower rack has a Power Clean, a special pull-out support in the rear
of the rack that can be used to support frying pans or baking pans in
upright position, thus taking up less space.
How to use Power Clean®:
1. Adjust the Power Clean® area (G)
folding down the rear plate holders
to load pots.
2. Load pots and casseroles inclined
vertically in Power Clean® area. Pots
have to be inclined towards the
power water jets.
2
3
1
1
3
2
A
B
Loading ...
Loading ...
Loading ...