4O33 User Manual

Loading ...

OPTIONS AND SETTINGS

TABLET (All-in-one)

This setting allows you to optimise the performance of the cycle

according to the type of detergent used. Enable it if you use combined

detergents in tablet form (rinse aid, salt and detergent in 1 dose).

To set the Tablet, enter in the setting

menu by pressing „OK” button and

navigate with „< , >” until „TABLET”

is shown, then press „OK” button.

START DELAY

The start of the cycle may be delayed for a selected period of time.

To set a delay, enter in the setting menu by pressing „OK” button and na-

vigate with „< , >” until „START DELAY” is shown, then press „OK” button.

With each press of the button “>” or “<“, the delay start increases by:

• every 0:30 if selection below 4 hours,

• every 1:00 if selection is below 12 hours,

• every 2 hours if selection is above 12 hours.

Default value is OFF.

If delay is selected, the is lit.

Once „OK” button is pressed the

delay is conrmed and the machine

comes back to the cycle selection

screen with delay value visible.

Press „START” button and close the door within 4 sec. to start the delay.

To remove the delay, press „<” or „>” button until „OFF” is displayed.

MULTIZONE

If there are not many dishes to be washed it can be loaded in one rack

only. Using this option you can select which rack you want to wash.

To set the Multizone, enter in the setting menu by pressing „OK”

button and navigate with „< , >” until „MULTIZONE” is shown, then

press „OK” button.

By default the MULTIZONE is not

active and all racks icons are lit.

The multizone icon becomes lit.

POWER CLEAN

Thanks to additional water jets this option provides a more intensive

and powerful wash in the specic area of lower rack.

Default value is OFF.

To set the Power Clean, enter in

the setting menu by pressing „OK

button and navigate with „< , >”

until „POWER CLEAN” is shown,

then press „OK” button.

TURBO

This option can be used to reduce the duration of the main cycles

while maintaining washing and drying performance levels.

To set the Turbo, enter in the setting

menu by pressing „OK” button and

navigate with „< , >” until „TURBO”

is shown, then press „OK” button.

With each press of the button

„>” or „<“ option will be ON or OFF.

Conrm by pressing „OK” button.

KEYLOCK

The KEYLOCK function blocks the

control panel except the „ON/OFF”

button.

To activate the Keylock, enter in the

setting menu by pressing „OK” button

and navigate with „< , >” until

„KEYLOCK” is shown, then press OK.

Once set, to deactivate it keep pressing „OK” button for a few seconds.

TUB LIGHT

When the feature is active the LEDs in the tub are automatically

switched on/o as soon as the user open/close the door respectively.

If the door remains opened for more than 10 min, the LEDs in the

tub switch o (to turn them on again, the door has to be closed and

opened again).This feature is active by default, but it is possible to

deactivate it in the “SETTINGS MENU”.

CONNECTIVITY (Remote Control)

When the Remote Control function is activated, you can control the

dishwasher through your

Tablet / Smartphone

For more information - see section „CONNECTIVITY (Remote Control)

MENU”

TABLET OFF

TABLET ON

START DELAY OFF

<STARTS IN h> OFF

<STARTS IN h> 4:00

MULTIZONE OK

POWER CLEAN OFF

POWER CLEAN ON

TURBO OFF

TURBO ON

KEYLOCK ACTIVATED

PRESS "OK” FOR 3 SEC.

KEYLOCK DEACTIVATED

KEEP PRESSED…

With each cycle additional options can be used. A full list of available options working with specic cycles can be found in the Cycles Table on

the previous page. All active options are shown on the display.

To set an option press „OK” button. SET OPTIONS message is shown for a few seconds. Then use „<” or „>” button to navigate through the

option list. Press „OK” to select the option, in the setting menu the LED above „OK” button is lit.

If the option is not available, it will be still visible in its position but with „ ”

Loading ...

User Manual - Page 10