Loading ...
Loading ...
Loading ...
ENGINE OIL DIPSTICK - 1.5L
ECOBLUE
E140423
A
B
Minimum.A
Maximum.B
ENGINE OIL DIPSTICK - 2.0L
DURATEC-HE (MI4)/2.0L FLEX
FUEL/2.5L
E250320
Minimum.A
Nominal.B
Maximum.C
ENGINE OIL CHECK
WARNING: Do not work on a hot
engine.
To check the engine oil level consistently
and accurately, do the following:
1. Make sure the parking brake is on. Make
sure the transmission is in park (P) or
neutral (N).
2. Run the engine until it reaches normal
operating temperature.
3. Make sure that your vehicle is on level
ground.
4. Switch the engine off and wait 15
minutes for the oil to drain into the oil
pan. Checking the engine oil level too
soon after you switch the engine off
may result in an inaccurate reading.
5. Open the hood. See Opening and
Closing the Hood (page 270).
6. Remove the dipstick and wipe it with
a clean, lint-free cloth. See Under
Hood Overview (page 272).
7. Reinstall the dipstick and remove it
again to check the oil level. See
Engine Oil Dipstick (page 276).
8. Make sure that the oil level is between
the maximum and minimum marks. If
the oil level is at the minimum mark,
add oil immediately. See Capacities
and Specifications (page 345).
9. If the oil level is correct, replace the
dipstick and make sure it is fully seated.
Note: Do not remove the dipstick when the
engine is running.
Note: If the oil level is between the
maximum and minimum marks, the oil level
is acceptable. Do not add oil.
276
2020 Transit Connect (CHC) Canada/United States of America, CG3739en enUSA, Edition date: 201903, First-Printing
Maintenance
Loading ...
Loading ...
Loading ...