Loading ...
Loading ...
Loading ...
4.3. HDMI audio output
“AUDIO” > “HDMI audio” setting
A
Bitstream LPCM Re-encode
Media Source
BD
Dolby Digital Dolby Digital 2ch PCM Dolby Digital
Dolby Digital Plus Dolby Digital Plus 2ch PCM
Dolby Digital Plus
*1
Dolby TrueHD Dolby TrueHD 2ch PCM
Dolby TrueHD
*1
DTS DTS 2ch PCM DTS
DTS-HD
High Resolution
DTS-HD
High Resolution
2ch PCM
*2
DTS-HD
High Resolution
*3
DTS-HD
Master Audio
DTS-HD
Master Audio
2ch PCM
*2
DTS-HD
Master Audio
*3
LPCM Multi LPCM Multi LPCM
Multi LPCM
*1
DVD
Dolby Digital Dolby Digital 2ch PCM Dolby Digital
DTS DTS 2ch PCM DTS
MPEG Multi LPCM Multi LPCM Multi LPCM
PCM Multi LPCM Multi LPCM Multi LPCM
Audio CD LPCM 2ch PCM 2ch PCM 2ch PCM
DTS-CD DTS DTS 2ch PCM DTS
AVCHD
Dolby Digital Dolby Digital 2ch PCM Dolby Digital
LPCM Multi PCM Multi PCM Multi PCM
Audio file
MP3/FLAC/WAV 2ch PCM 2ch PCM 2ch PCM
AAC
AAC
*4
2ch PCM
AAC
*4
Netflix
Dolby Digital Plus Dolby Digital Plus 2ch PCM Dolby Digital Plus
HE-AAC AAC 2ch PCM AAC
VUDU™
Dolby Digital Dolby Digital 2ch PCM Dolby Digital
Dolby Digital Plus Dolby Digital Plus 2ch PCM Dolby Digital Plus
HE-AAC AAC 2ch PCM AAC
MP3 2ch PCM 2ch PCM 2ch PCM
YouTube™ HE-AAC AAC 2ch PCM AAC
*1 If there is secondary audio or Interactive audio, it will be output in Dolby Digital.
*2 Only the core substream is decoded.
*3 If there is secondary audio or Interactive audio, it will be output in DTS.
*4 AAC Raw only supports the source with sample rate between 32kHz and 48kHz.
Note
•
If the connected device is not compatible with HDMI Bitstream, audio will be output as multi LPCM or 2-channel
down-mixed LPCM depending on the capability of the connected device even if you select “Bitstream” in “HDMI
Audio” setting.
•
If “HDMI Audio” is set to “Bitstream” and this unit is connected to a Bitstream compatible device, only primary audio
of the BD-Video will be output. (Secondary audio and button sounds will not be output.)
•
In order to configure “HDMI Audio” settings, the following conditions must be met:
–
“Voice Guide” is set to “Off”.
–
This unit is not in resume-on-stop mode.
If this unit is in resume-on-stop mode, remove the disc to enable configuration.
15EN
Loading ...
Loading ...
Loading ...