FREESTANDING MOTORCYCLE HELMET &
GEAR TIDY
MODEL NO: MS081FS2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
8 DO NOT locate this tidy in such a position as to create the risk of injury from contact with the head or any other part of the body.
8 DO NOT overload this tidy; it should only be used for the designed purpose.
8 DO NOT locate in a position where items could fall from the tidy owing to accidental contact.
9 Ensure that, when installed, it can be used without over-reaching or over-balancing.
2. INTRODUCTION
Steel construction powder paint coated for added corrosion resistance. Designed to organise the storage of gloves, clothing, boots and helmet.
Allows for easy storage of four or more helmets. Can be congured to allow for one piece race leathers to be hung on one side and three
shelves on the other. Shelf capacity of 18kg and hanging rack capacity of 10kg. Capable of storing two full sets of kit and more.
3. SPECIFICATION
Model No: ............................................................ MS081FS2
Depth: ........................................................460mm each side
Height: .....................................................................1925mm
Width: .........................................................................545mm
4. ASSEMBLY
4.1. Attach base unit (A) onto lower uprights (B). Fix with two screws underneath and
four screws, nuts and washers through the triangular shaped supports (C).
4.2. Insert the upper uprights into the lower uprights.
4.3. Position shelves (E) and glove racks (F) as required.
5. CARE
5.1. Clean with a soft, damp cloth.
8 DO NOT use abrasive or solvent cleaners.
Refer to
instructions
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
REGISTER YOUR
PURCHASE HERE
A
B
C
D
E
F
MS081FS Issue 2 (4,F) 11/04/2023
Original Language Version
© Jack Sealey Limited
