Loading ...
Loading ...
Loading ...
TROUBLE SHOOTING
Thorkitchen works hard to ensure that you don’t have problems with your new gas
range.If you experience a problem,look first for a solution in the table below.If,after
trying the suggested solution,you’re still having trouble,call Thorkitchen
at 877-288-8099.
Installation
Problem
Problem
Possible Cause
Possible Cause
Solution
Solution
The range is not level.
The appliance must
be accessed for
servicing and cannot
be moved easily.
The surface units will
not maintain a rolling
boil or will not cook
fast enough.
Are as of discoloration
on the Cooktop.
The surface units will
not turn on.
You may be using inappropriate
cookware.
Use pans which are flat and match
the diameter of the surface unit
selected.
Cover the pan with a lid until the
desired heat is obtained.
Replace the fuse or reset the circuit
breaker.
Check if the correct control is set for
the surface unit you are using.
Refer to the section on the care and
cleaning of the glass Cooktop.
In some areas, the power (voltage)
may be low.
A fuse in your home may be blown
or the circuit breaker tripped.
The cooktop controls are set
improperly.
Food spillover was not cleaned.
The appliance has been
installed properly.
The floor is sagging or sloping.
The kitchen cabinets are not
properly aligned and make the
range appear to be not level.
The kitchen cabinets are not square
and too close to the appliance.
Carpet is interfering with movement
of the range.
Contact a carpenter to correct the
situation.
Insure the cabinets are square
and provide sufficient room for
installation.
Contact a carpenter to correct the
situation.
Provide sufficient space so the
range can be lifted over the carpet.
• Place the oven rack in the center
of the oven. Place a level on the
oven rack. Adjust the leveling legs
at the base of the range until the
oven rack is level.
• Insure the floor is level and strong
and stable enough to adequatley
support the range.
Cooktop
Loading ...
Loading ...
Loading ...