Thor Kitchen ARE30 30 Inch Freestanding Professional Electric Range with 4 Elements, 4.8 cu. ft.

Use and Care Manual - Page 41

For ARE30.

PDF File Manual, 51 pages, Read Online | Download pdf file

ARE30 photo
Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE
Cleaning sugary spills and melted plastics
NOTE
If pitting or indentations in the glass surface have already occurred, they can’t be repaired. The Cook top
glass will have to be replaced.
Sugary spillovers (such as jellies, fudge, candy, and syrups) or melted plastics can cause pitting of the
Cooktop surface. This is not covered under the warranty.
You should clean the spill while it is still hot. Take special care when removing hot substances.
When using a scraper, make sure that it is new and the razor blade is still sharp. Do not use a dull or
nicked blade.
1. Turn off all surface burners. Remove hot pans.
2. Wearing an oven mitt, use a single-edge, razor-blade scraper to move the spill to a cool area of the
Cooktop. Remove the spill with paper towels.
3. Wait until the Cook top has cooled, then remove any remaining spillover. Don’t use the surface burners
again until all of the residue has been completely removed.
Removing burned-on residue
1. Make sure that all surface burners are turned off, then let the Cook top cool.
2. Spread a few drops of ceramic Cook top cleaner on the entire burned residue area.
3. Using a cleaning pad for ceramic cooktops,rub the residue area.Apply pressure as needed.
4. If any residue remains,repeat the steps listed above as needed.
5. For additional protection,after all residue has been removed,polish the entire surface with a ceramic
Cook top cleaner and a paper towel.
Removing heavy, burned-on residue
Make sure that all surface burners are turned o
,then let the Cook top cool.
Use a single-edge,razor-blade scraper at approximately a 45°angle against the glass surface and
scrape the residue.
You need to apply remove the residue.Do not scrape the seal.
After scraping with the scraper,spread a few drops of ceramic Cook top cleaner on
the entire burned residue area.Use the cleaning pad to remove any remaining residue.
For additional protection,after all residue has been removed,polish the entire surface with a ceramic
Cook top cleaner and a paper towel.
Cleaning the Cook top seal
Lay a wet cloth on the seal for a few minutes, then wipe clean with a nonabrasive cleaner.
Loading ...
Loading ...
Loading ...