Hikvision DS-2DF9C435IH-DLW Quick Start Guide

Loading ...

Network Speed Dome·Quick Start Guide

4. Connect the cables.

Note:

Water-proof treatment is required for cable connectors. Refer to Section 2.9 and 2.10

for details.

5. Align the speed dome with the head cover. Use the wrench to tighten the lock screws.

Lock Screws

Figure 2-57 Fix the Speed Dome to Head Cover

2.7 Installing Type VIII Speed Dome

Wall Mounting

Notes:

 For cement wall, you need to use the expansion screw to fix the bracket. The

mounting hole of the expansion pipe on the wall should align with the mounting

hole on the bracket.

 For wooden wall, you can just use the self-tapping screw to fix the bracket.

 Make sure that the wall is strong enough to withstand more than eight times the

weight of the speed dome and the accessories.

 Water-proof treatment is required for cable connectors. Refer to Section 2.9 and

2.10 for details.

Steps:

1. Install the bracket.

1) Drill four screw holes in the wall according to the holes on the bracket, and

then insert four expansion screws into the mounting holes.

2) Attach the bracket to the wall by aligning the four screw holes on the bracket

with four expansion screws on the wall.

3) Secure the bracket with four sets of hex nuts and washers.

Loading ...

Hikvision DS-2DF9C435IH-DLW 9-inch 4 MP 35X DarkFighterX IR Network Speed Dome