Loading ...
Loading ...
Loading ...
Network Speed Dome·Quick Start Guide
16
Screw Holes
Cable Hole
Figure 2-19 Secure the Mounting Base
7). Route the cables for the speed dome. Align the bottom of the speed dome with
the mounting base.
8). Line up the direction of arrow with the spring end of the mounting base.
9). Push the speed dome upwards and then forwards in the direction of the arrow.
When the speed dome is placed in position, the spring will automatically snap
into the lock clip firmly as shown in Figure 2-20.
Line up
Push Forwards
Push Upwards
Figure 2-20 Attach the Back Box to the Mounting Base
4. Remove the protective film on the bubble after the installation is finished.
2.2 Installing Type II Speed Dome
Wall Mounting
Notes:
For cement wall, you need to use the expansion screw to fix the bracket. The
mounting hole of the expansion pipe on the wall should align with the mounting
hole on the bracket.
Loading ...
Loading ...
Loading ...