Loading ...
Loading ...
Loading ...
Network Speed Dome·Quick Start Guide
17
For wooden wall, you can just use the self-tapping screw to fix the bracket.
Make sure that the wall is strong enough to withstand more than eight times the
weight of the speed dome and the accessories.
The bracket shown in installation is the recommended bracket for this series of
speed dome, and a pendent adapter is required if any other bracket is selected. The
dimension of pendant adapter is G1
1
2
.
Water-proof treatment is required for cable connectors. Refer to Section 2.9 and
2.10 for details.
Steps:
1. Loosen the four lock screws on the speed dome flange as shown in Figure 2-21.
Note:
Do not remove the lock screws from the speed dome.
Lock Screws
Figure 2-21 Loosen the Lock Screws
2. Pull the bubble to separate it from the back box, and remove the protective foam,
sticker and lens cover from the dome drive.
Back Box
Lens Cover
Protective Foam
Bubble
Sticker
Figure 2-22 Remove the Protective Accessories
3. Install the memory card.
Loading ...
Loading ...
Loading ...