Loading ...
Loading ...
Loading ...
Network Speed Dome·Quick Start Guide
19
Lock Screw
Figure 2-25 Install the Speed Dome to the Bracket
7. Remove the protective film on the bubble after the installation is finished.
2.3 Installing Type III Speed Dome
Wall Mounting
Notes:
For cement wall, you need to use the expansion screw to fix the bracket. The
mounting hole of the expansion pipe on the wall should align with the mounting
hole on the bracket.
For wooden wall, you can just use the self-tapping screw to fix the bracket.
Make sure that the wall is strong enough to withstand more than eight times the
weight of the speed dome and the accessories.
The bracket in the installation is the recommended bracket for this series of speed
dome, and a pendent adapter is required if any other bracket is selected. The
dimension of pendant adapter is G1
1
2
.
Water-proof treatment is required for cable connectors. Refer to Section 2.9 and
2.10 for details.
Steps:
1. Remove the protective sticker as shown in Figure 2-26.
Loading ...
Loading ...
Loading ...