Simpson Cleaning SWT-525172 Simpson Water Trailer 50-State

User Manual - Page 35

For SWT-525172.

PDF File Manual, 40 pages, Read Online | Download pdf file

SWT-525172 photo
Loading ...
Loading ...
Loading ...
Page 33
13. With the assistance of another person, lift the engine/pump assembly and rotate it
back into position. Place it back onto the vibration mounts being careful not to damage
the o-rings on the manifold ttings.
15. Place the worm screw clamps back onto the ttings. Tighten.
16. Place the spark plug lead back onto the spark plug.
14. Place the nuts back onto the mounting bolts. Tighten with an open end wrench.
Fig. 25
Engine Maintenance
Before each use, check the engine for loose or damaged parts, signs of oil or fuel
leaks and/or any other condition that may a󰀨ect proper operation. Always keep all
safety guards in place and in proper working order. Repair or replace all damaged or
defective parts immediately.
For safety reasons, the manufacturer recommends all engine service and repairs
(including emission control devices and systems) to be performed by an authorized
service center. All warranty replacements or repairs must be performed by an
authorized distribution or service center. To nd an authorized service center near
your, obtain information about how to make a warranty claim or to make arrangements
for authorized warranty repairs, please call 1-877-362-4271 or
contact through
email
For all other information on engine maintenance, refer to your Engine Owners Manual.
Plumbing Maintenance
The plumbing of the SIMPSON Water Trailer was designed to give years of worry-free
life. However, it is important to monitor all connections for leaks. If the trailer is not to
be used for an extended period of time, make sure to drain the trailer of water as talked
about in the DRAINING THE SYSTEM FOR STORAGE section of the manual. It is of
utmost importance to winterized the system if freezing weather is expected. Routinely
rotate all valves to make sure they move freely without binding.
Trailer Maintenance
Inspect the nozzles on the spray bar for debris that may cause the spray pattern to be
inconsistent. Remove large pieces of debris with needle-nosed pliers then sweep the
orice of the nozzle with a small bottle brush to remove any remaining particles.
For trailer maintenance, safety and towing information, please see the SIMPSON
Trailer Operations Manual, part number 7114734.
Loading ...
Loading ...
Loading ...