Loading ...
Loading ...
Loading ...
USING THE SPRAY BAR
Page 16
The spray bar allows you to water down areas for dust reduction as well as washing
the pavement of loose dirt and debris. In order to use the spray bar, make sure the
tank is fully lled or has enough water for your application. Do not allow the pump to
go dry as damage may occur.
CAUTION:CAUTION:
Never allow the tank water level to fall below a level of one inch above the outlet pipe of
the tank. If the tank fully drains, pump damage may occur from lack of water and you will
only be able to rell the tank from a pressurized water source.
PUMP DAMAGE
2. Ensure the pump is primed. If you start to remove the primer cover and water
begins to ow out, it is primed. If not, remove the cover and ll the pump with water
(Fig. 10). Place the cover back onto the funnel, tighten.
3. Move the ow valves to the PUMP position (Fig. 1).
4. Make sure the spray bar and side port valves are closed (Figs. 3 & 4).
5. Using the STARTING THE ENGINE instructions, start the engine of the pump.
6. Move the spray bar valve to OPEN (Fig. 4).
7. Use the spray bar until your application is completed or you have met the minimum
allowed amount of water in the tank. DO NOT allow the tank to pump dry.
8. Move the spray bar valve to CLOSED.
9. Shut o the engine by using the SHUTDOWN instructions.
1. Move the tank valve to OPEN (Fig. 3).
10. Move the tank valve to CLOSED.
Loading ...
Loading ...
Loading ...