Loading ...
Loading ...
Loading ...
WARNING:WARNING:
NOTICE
Page 22
OPERATING CHECKLIST
Location
Engine exhaust contains carbon monoxide, an odorless, colorless, poisonous gas.
Running an engine indoors will kill you in minutes. Never use this product inside a garage
or any other kind of enclosure even if doors and windows are open. Run engine outside
at least 20 feet (6 meters) away from windows, doors, and vents. Carefully consider wind
direction and air currents when using this product outside to avoid breathing in engine
exhaust. Always use a carbon monoxide detector in any occupied buildings near the
running engine.
TOXIC FUMES
Being that this is a trailer based device, it is understood that the trailer could be
used in many dierent locations. Never operate the gasoline powered pump inside
any structure or close to any structure. Fumes can easily enter the structure causing
carbon monoxide poisoning.
High Altitude Operation
This engine will have proper engine performance and emission control when it is
operated at or below an altitude of 5000 feet (1524 meters). This engine requires a high-
altitude carburetor kit to ensure proper engine performance and emission control when
operated at altitudes above 5000 feet (1524 meters). Operating the machine with the
wrong engine conguration above 5000 feet (1524 meters) may increase its emissions,
decrease fuel eciency, and hurt performance. To obtain a high altitude carburetor kit,
contact your nearest authorized service center.
Operating the engine with a high-altitude carburetor jet kit at an altitude below 5000 feet
(1524 meters) will cause the engine to run too hot. Overheating the engine could result
in serious engine damage. To avoid this hazard, make sure the correct carburetor kit is
installed and the air/fuel mixture is set correctly for your altitude.
ALTITUDE
Operating Conditions
Before each use, check for loose or damaged parts, leaks, and/or any other condition
that may aect proper operation. Repair or replace all damaged and/or defective
parts immediately. Always keep all safety guards in place and in proper working order.
For safety reasons, the manufacturer recommends all maintenance and repairs be
performed by an authorized service center.
Before starting the engine, remove any excessive dirt and debris from cooling vents,
exhaust, and starter recoil areas. If you have questions about the proper use of your
pump, please contact customer support at 1-877-362-4271 or [email protected].
Loading ...
Loading ...
Loading ...