Loading ...
Loading ...
Loading ...
WARNING:WARNING:
Page 27
STARTING THE ENGINE
Attempting to start the engine incorrectly can result in engine and/or pump damage, and
may cause serious injury or death. To avoid these hazards, be sure to read, understand,
and follow the steps outlined in the OPERATING CHECKLIST section of the owner’s
manual before starting the engine, and follow all the guidelines for proper use of the
SIMPSON Water Trailer.
OPERATING CHECKLIST
Starting the Engine
1. Complete the steps in the OPERATING CHECKLIST section of this manual before
starting the engine. Failure to do so could cause damage to the engine. If needed,
refer to your Engine Owner’s Manual for specic starting instructions. Lastly, make
sure the pump is primed and the trailer is ready for the desired operation.
2. Turn the engine switch to the ON position.
3. Slide the fuel valve to the ON position.
4. Slide the throttle to the RUN position.
OFF
ON
OFF
ON
NOTICE
This pump will not prime when dry. Running the pump dry without priming can damage the
pump assembly and seals. Damage caused by running dry is not covered by warranty.
To avoid damaging the seals and pump assembly, do not run the pump when it is dry
without priming.
PUMP PRIMING
Loading ...
Loading ...
Loading ...