Loading ...
Loading ...
Loading ...
PRESSURE FILL PIPE INSTALLATION
The following tools are required:
(2) 1/2” open end wrenches
(1) 9/16” open end wrench
Please locate the pressure ll pipe in the hose storage bin at the rear of the trailer. Along
with it will be a bag containing the required hardware and U-bolts. Unwrap the protective
plastic from the pipe.
Step 1: Remove the cover from the top of the tank.
Step 2: Using the 5/16” hex bolts (2), 5/16” at washers (3) and 5/16” nylon insert lock
nuts (4), attach the ll pipe bracket (1) to the tank using 1/2” open end wrenches
(Fig. A).
Step 3: Place the pressure ll pipe (5) allowing the elbow to t into the circular relief of
the bracket (Fig. A). Attach using one of the included U-bolts (6). At this time,
only hand thread the nuts, do not tighten.
1
2
3 4
6
5
Fig. A
Step 4: Using the remaining U-bolt (6), attach the pressure ll pipe to the lower bracket
(Fig. B). Tighten both U-bolts using a 9/16” open end wrench.
Step 5: Place the cover back onto the tank.
Fig. B
6
Page 8
Loading ...
Loading ...
Loading ...