Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/50799566-swt-525172/bgb.png)
PRESSURE FILLING THE TANK
CAUTION:CAUTION:
Page 9
The tank can be lled from a pressurized water source by using the 2” tank ll on
the passenger’s side of the trailer. NOTE: Do not use a re hydrant unless you have
contacted your local municipality. Typically the water will need to be metered and a
back ow preventer may need to be placed with the meter by the municipal water
department.
1. Remove the cover of the tank.
2. Connect a 2” hose from the pressurized water source to the ll connector.
3. Turn on the water source allowing the tank to ll to the required level.
4. Turn o the water source then disconnect the hose from the ll pipe.
5. Place the cover back onto the tank, secure.
Whenever the trailer is disconnected from the tow vehicle, the trailer should be parked
on a level surface and with the wheels chocked (not included). Trailers with non-chocked
wheels can roll when parked on non-level pavement or when accidentally bumped from
another vehicle leading to injury/death and property damage.
TRAILER MOVEMENT
Loading ...
Loading ...
Loading ...