Loading ...
Loading ...
Loading ...
1625-2
Users Manual
16
Operation
Warning
To prevent possible electrical shock, fire, or personal injury, use the
instrument on voltage free systems only.
1. Set measuring function with the central rotary switch.
2. Connect the measurement leads to the instrument.
3. Start measurement with "START TEST" button.
4. Read out measured value.
Advanced Operation
Power On Functions
At power on of the instrument with the central rotary switch, it is possible to access
certain operating conditions by pressing specific button combinations:
a) Standard mode
If the device is put into operation without further button control, it switches into a battery
saving condition (Stand by-display "---") approximately 50 seconds after the termination
of a measurement, or after a button push or turn of the rotary switch. Pressing the
"DISPLAY MENU" reactivates the instrument; the "old" measured values can be read out
again. After 50 min. of stand by the Display is turned off completely. Instrument is
reactivated with ON / OFF on the rotary switch
b) Stand by disable
A simultaneous push of buttons "DISPLAY MENU" and "CHANGE ITEM" at power on
prevents the instrument from being switched off automatically (Stand by). The battery
saving mode is reactivated with ON / OFF on the central rotary switch.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...