Rigol DS1074Z-S-PLUS DS1000Z user manual

Loading ...

Chapter 6 MATH and Measurement RIGOL

DS1000Z User Guide 6-31

Frequency Counter Measurement

The hardware frequency counter supplied with DS1000Z oscilloscope can make more

precise measurement of the input signal frequency.

Press Measure  Counter to select CH1-CH4 or D0-D15 as the measurement

source. The measurement result is displayed at the upper right corner of the screen

and you can identify the current measurement source according to the color of the

icon and channel number. The following figure is the result of the frequency

measurement of the input signal of CH1.

Select "OFF" to disable the frequency counter measurement function.

Note: When the frequency of the input signal of the measurement source is lower

than 15 Hz, the measurement result is displayed as "<15Hz".

Measurement Setting

1. Source Selection

Press Measure  Source to select the desired channel for measurement

(CH1-CH4, MATH or D0-D15). The color of the parameter icons under MENU at

the left of the screen will change with the source selected.

2. Measurement Range

Press Measure  Range  Region to select the "Screen" region or "Cursor"

region for measurement.

When the "Cursor" region is selected, you can press CursorA and CursorB and

then use

to adjust the positions of the two cursor lines respectively to

determine the measurement range; or you can press CursorAB and use to

adjust the positions of cursor A and cursor B at the same time (the horizontal

distance between cursor A and cursor B remains unchanged). During the

adjustment, two cursor lines (denote the current positions of the cursors) are

displayed on the screen and will disappear about 2 s later after you stop

adjusting the cursor position(s).

Note: The adjustable range of the position of cursor A (cursor B) is related to

the current position of cursor B (cursor A) and the position of cursor A must be

lower than that of cursor B. You can press CursorA, CursorB or CursorAB and

then press

to quickly set the position of the corresponding cursor to the

Loading ...

Rigol DS1074Z-S-PLUS DS1074Z-S+ oscilloscope