Loading ...
Loading ...
Loading ...
●
Install the device in such a way that lightning strikes can be avoided. Provide a surge suppressor
at the inlet opening of the equipment under special condions such as the mountain top, iron
tower, and forest.
●
Keep the device away from
magnec interference.
●
Avoid device
installaon on vibratory surfaces or places. Failure to comply with this may cause
device damage.
●
DO NOT touch the heat dissipaon component to avoid burns.
●
DO NOT expose the device to extremely hot, cold, or humidity environments. For temperature
and humidity requirements, see device specicaon.
●
No naked
ame sources, such as lighted candles, should be placed on the equipment.
●
DO NOT touch the sharp edges or corners.
●
To prevent possible hearing damage, DO NOT listen at high volume levels for long periods.
●
The device can only be safely used in the region below 2,000 meters above the sea level.
●
The equipment shall not be exposed to dripping or splashing and that no objects
lled with
liquids, such as vases, shall be placed on the equipment.
●
The venlaon should not be impeded by covering the venlaon openings with items, such as
newspapers, table-cloths, curtains, etc. The openings shall never be blocked by placing the
equipment on a bed, sofa, rug or other similar surface.
●
This equipment is suitable for mounng on concrete or other non-combusble surface only.
●
Keep body parts away from motors. Disconnect the power source during servicing.
Light Hazard
●
DO NOT stare at the light source when the supplement light is working. The light may cause blue
light hazard to your rena.
●
When you install or maintain the device without
protecon, stay at the safety range or the area
which cannot be irradiated directly by the light source.
Maintenance
●
If smoke, odor, or noise arises from the device, immediately turn o the power, unplug the
power cable, and contact the service center.
●
If the device cannot work properly, contact the store you purchased it or the nearest service
center. DO NOT disassemble or modify the device in the unauthorized way (For the problems
caused by unauthorized
modicaon or maintenance, the company shall not take any
responsibility).
●
Keep all packaging
aer unpacking them for future use. In case of any failure occurred, you need
to return the device to the factory with the original packaging. Transportaon without the
original packaging may result in damage to the device and the company shall not take any
responsibility.
Roadside Parking Terminal User Manual
vii
Loading ...
Loading ...
Loading ...