Hikvision DS-TPE400-E User Manual

Loading ...

Figure 3-4 Manual Add

Select Registraon Mode.

Select Protocol Type of the added camera.

Note

The device and the camera should both support the selected protocol type.

Enter the camera IP address/domain name, port, user name, password, and other informaon.

Note

Channel No. is only used to select the access channel when mulple channel devices are

accessed. For example, if you want to access the Channel 5 device, you can choose Channel 2 as

a network camera to access, then enter 2 at Channel No..

Click OK.

Oponal: You can also do the following operaons.

Edit

Edit the added camera IP address.

Delete Delete the added camera.

Reboot Reboot the online camera.

Access Directly Access the online camera.

3.3.2 Set Interacon Parameters

Set interacon parameters to control the interacon data between the camera and the device.

Before You Start

Add the camera.

Steps

Go to Param Cong → System → Camera Management → Interacve Sengs .

Select a camera.

Roadside Parking Terminal User Manual

Loading ...

Hikvision DS-TPE400-E On-street Parking Terminal