Loading ...
Loading ...
Loading ...
3.2 Set Stac Router
Set a stac router to access across network segments. The device will transmit as a router.
Steps
1.
Go to Param
Cong → Network → Basic Sengs → Stac Router .
2.
Click Add to add a stac router.
Figure 3-3 Set Stac Router
3.
Check Enable.
4.
Enter Target Network Segment, Subnet Mask and Gateway.
Note
Set the gateway according to the selected network interface.
5.
Select the network interface that needs external communicaon for roung.
-
When you need other network segments to access the connected camera through the G1, set
the G1 as a
stac router, and the internal IP address will serve as the gateway.
-
When you need to upload data to other network segments through the G2, set the G2 as a
stac router, and the external IP address will serve as the gateway.
6.
Click OK.
Note
You can delete or edit the added router.
3.3 Manage Camera
3.3.1 Add IP Camera
Add cameras before managing and analyzing data.
Roadside Parking Terminal User Manual
7
Loading ...
Loading ...
Loading ...