Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/85013846-ds-tpe400-e/bg13.png)
Chapter 3 Basic Operaon
3.1 Set LAN IP Address
3.1.1 Set Internal IP
The internal network is for self-adapve network interfaces on the device panel. It is mainly used
to connect the capture camera, display screen and other devices.
Steps
1.
Go to Param
Cong → Network → Basic Sengs → TCP/IP → Internal Network Sengs .
2.
Select NIC Type according to the actual network.
Figure 3-1 Set Internal IP
3.
Set network parameters.
-
Check Auto to get the IP address
automacally if the network supports distribung the IP
address automacally.
-
Manually enter IP address, subnet mask, gateway, MTU, and other parameters.
Note
●
The internal IP address and the device on the internal network segment (such as the capture
camera) should be set to the same network segment, and it must be set to a dierent network
segment from the external IP address.
●
MTU stands for maximum transmission unit. It is the size of the largest protocol data unit that
can be communicated in a single network layer transacon.
4.
Click Save.
Roadside Parking Terminal User Manual
5
Loading ...
Loading ...
Loading ...