Loading ...
Loading ...
Loading ...
Result
The device will reboot automacally aer upgrade.
13.4 Reboot
When the device needs to be rebooted, reboot it via the soware instead of cung o the power
directly.
Steps
1.
Go to Param
Cong → System → System Maintenance → Upgrade & Maintenance .
2.
Click Reboot.
3.
Click OK to reboot the device.
Reboot
The device will reboot
automacally in every 2 a.m.
Reboot without HDD
The device will reboot aer no HDD is detected.
13.5 Restore Parameters
When the device is abnormal caused by the incorrect set parameters, you can restore the
parameters.
Steps
1.
Go to Param
Cong → System → System Maintenance → Upgrade & Maintenance → Restore
Default Sengs .
2.
Select the
restoraon mode.
-
Click Restore to restore the parameters except the IP parameters and
plaorm parameters to
the default
sengs.
-
Click Default to restore all the parameters to the factory sengs.
3.
Click OK.
13.6 Set RS-485
Set RS-485 parameters if the device has been connected to a vehicle detector or other RS-485
devices.
Before You Start
The corresponding device has been connected via the RS-485 serial port.
Steps
1.
Go to Param Cong → System → System Sengs → Serial Port .
Roadside Parking Terminal User Manual
46
Loading ...
Loading ...
Loading ...