Loading ...
Loading ...
Loading ...
Quick Add
If cameras need to be added via the parameters such as the default protocol and the port, it is
recommended to use quick add.
Before You Start
Connect the device to the camera via the network interface.
Steps
1.
Go to Param
Cong → System → Camera Management → IP Camera .
2.
Click Quick Add.
3.
Check the camera that need to be added, enter the corresponding user name and password,
and click OK.
Note
You can check cameras that have the same user name and password to add in batch.
4.
Oponal: You can also do the following operaons.
Edit Edit the added camera IP address.
Delete Delete the added camera.
Reboot Reboot the online camera.
Access Directly Access the online camera.
Manual Add
Add manually if you need to customize the access protocol or port.
Before You Start
Connect the device to the camera via the network interface.
Steps
1.
Go to Param Cong → System → Camera Management → IP Camera .
2.
Click Add.
Roadside Parking Terminal User Manual
8
Loading ...
Loading ...
Loading ...