Loading ...
Loading ...
Loading ...
AXIS M1114–E
System Options
System Options
Security
Users
User access control is enabled by default and can be configured under System O ptions > Security > Users. An administrator can
set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means
that anybody may access the Live View p age.
The user list displays a uthorize d users and us e r groups (access levels):
Viewer - Access to the Live View page
Operator - Access to the Live View page and to all settings except System Options
Administrator - Unrestricted access to all settings; can add, modify and remove other users.
Under HTTP/RTSPPasswordSettings, select the type of password to allow. You may need to allow unencrypted passwords if there
are viewing clients that do not support encryption, or if you upgraded the firmware and existing clients support encryption but need
to log in again and be c onfiguredtousethisfunctionality.
Under User Settings, select the Enable anonymous viewer login option to allow anonymous users access to the Live V iew page.
Select the Enable anonymous PTZ control login to allow anonymous users access to the PTZ controls.
Deselect the Enable Basic Setup option to hide the Basic Setup menu. Basic Setup provides quick access to settings that should be
made before using the Axis prod uct.
ONVIF
ONVIF (Open Network Video Interface Forum) is a glob al interface standard that ma kes it easier for en d u s er s, integrators, consultan ts ,
and manufactur ers to take advantage of t he possibilities of fer ed by network video technology. ONVIF ena bles interoperablity between
different vendor products, increased flexibility, red
uced cost and future-proof systems.
By creating a user you automaticall
y e nable ONVIF communication. U se the user name and password with all ONVIF communication
with the product. For more information see www.onvif.org
IP Address Filter
IP address filtering is enabled on the System Options > Security > IP Address F ilter page. Once enabled, the listed IP address are
allowed or denied acces
s to the Axis product. Select Allow or Deny from the list and click Apply to enable IP address filtering.
The administr
ator can add up to 256 IP address entries to the list (a single entry can contain multiple IP addresses).
HTTPS
HTTPS (HyperTe xt Transfer Protocol over Se c ure Socket Layer, or HTTP over SSL) is a web protocol providing encrypted browsing.
HTTPS can also be used by users and clients to verify that the correct device is b eing accessed. The security leve l provided by
HTTP
S is considered a dequate for most commercial exchanges.
The Axis product can be configur ed to require HTTPS when users from d iffe re nt user groups (administrator, operator, viewer) connect.
To use HTTPS, an HTTPS certificate must first be installed. Go to System Options > Security > C ertificates to install and manage
certificates. See
Certificates, on page 32
.
To enable H TTPS on the Axis product:
1. Go to System Options > Security > HTTPS
31
Loading ...
Loading ...
Loading ...