Hikvision DS-KD-AL8 User Manual

Loading ...

Select I/O input No., input mode, output No., and output mode.

Click Save to enable the sengs.

Note

●

For door staon, there are 4 I/O input terminals. By default, Terminal 1 and 2 correspond to

Door Status. Terminal 3 and 4 correspond to interfaces of Door Switch.

●

For door staon, there are 2 I/O Output Terminals. Terminal 1 and 2 correspond to Door

interfaces (NO1/COM/NC1; NO2/COM/NC2) of door staon. Door 1 is enabled by default. You

can enable/disable IO Out according to needs.

Sub Module Conguraon

Steps

Click Intercom → Sub Module Conguraon , and you can view the sub module informaon,

including No., module type, status, and version.

Click to edit the sub module.

Display Module

●

Slide to adjust Screen Backlight Brightness.

●

Slide Enable Buzzer to enable the funcon.

Touch-Display Module

●

Slide to adjust Screen Backlight Brightness.

●

Slide Enable Buzzer to enable the funcon.

●

Select Address Book Display Mode according to actual needs.

●

Enable Homepage Shortcut Dial, you can tap contact on the main page to call.

●

Click Add to add custom buons.

PMR Module

Click to enable power consumpon selecon.

You can select 8 W, 6 W or 4 W for the PMR Module.

Note

If the system power goes o, an external power supply of 12 V, 2 A for the main unit is

necessary.

Note

●

The module address is used to dierenate the sub modules. See Congure Sub Module

Address for detailed conguraon instrucons.

●

For the other sub modules (indicator module, keypad module and card reader module), it

prompts Not supported.

●

The room No. for the main unit's call buon is 1 by default; and the room No. for the nametag

modules call buons are 2 to 7 by default.

Module Door Staon User Manual

Loading ...

Hikvision DS-KD-AL8 Alarm In Module

User Manual - Page 47