Loading ...
Loading ...
Loading ...
56-VOLT LITHIUM-ION POLE SAW — PS1000/PS1000-FC32
How to Sharpen the Cutters
Be sure to le all cutters (Fig. 21) to the
specied angles and to the same length,
as fast cutting can be obtained only when
all cutters are uniform.
1. Remove the battery pack. Wear
gloves for protection.
2. Make sure that the chain is
properly mounted and the quick
chain-tension adjust knob is fully
tightened, which ensures that the
chain is correctly tensioned.
3. Use a 5/32" (4.0 mm) diameter
round le and holder (available
separately). Do all of your ling at
the middle position of the guide bar.
4.
Keep the le level with the top plate of
the tooth. Do not let the le dip or rock.
5. Keep a correct sharpening angle of
30° between the le and the saw
chain (see Fig. 22 & 23). Always use
a le holder (available separately)
when sharpening saw chains by
hand. File holders have markings for
the sharpening angle.
6. Using light but rm pressure,
perform a stroke towards the front
corner of the tooth. Lift the le away
from the steel on each return stroke.
7. Make a few rm strokes on every
tooth. File all left hand cutters in
one direction. Then move to the
other side and le the right-hand
cutters in the opposite direction.
Occasionally remove lings from the
le with a wire brush (Fig. 24).
23
21
Top Plate
Side Plate
Depth Gauge
22
5/32" (4.0 mm)
Round File
Filing Direction
Cutter tooth
Sharpening
Angle: 30°
24
Left Hand
Cutters
Right Hand
Cutters
Loading ...
Loading ...
Loading ...