Loading ...
Loading ...
Loading ...
56-VOLT LITHIUM-ION POLE SAW — PS1000/PS1000-FC18
CONNECTING THE POLE SAW ATTACHMENT TO THE POWER HEAD
This pole saw works as a combination of the pole saw attachment and the power head
(Fig. 7a).
WARNING:
Never attach or adjust any attachment while the power head is
running or with the battery installed. Failure to stop the motor and remove the battery
may cause serious personal injury.
The pole saw attachment connects to the power head by means of a coupler device.
1. Stop the motor and remove the battery pack.
2. Loosen the wing knob.
3. Align the arrow on the pole saw shaft with the arrow on the coupler and push
the pole saw shaft into the coupler until you hear a clear “click” sound which
indicates the pole saw shaft is mounted into place (Fig. 7b).
4.
Pull the shaft of the attachment to verify it is securely locked into the coupler. If not,
rotate the pole-saw shaft from side to side in the coupler until it snaps into place.
5. Tighten the wing knob securely.
WARNING:
Be certain that the wing knob is fully tightened before operating the
equipment; check it periodically for tightness during use to avoid serious personal injury.
7a
Pole Saw Attachment
Power Head
7b
Arrow on the Pole
Saw Shaft
Wing Knob
Shaft Release Button
Arrow on the
Coupler
Loading ...
Loading ...
Loading ...