Loading ...
Loading ...
Loading ...
56-VOLT LITHIUM-ION POLE SAW — PS1000/PS1000-FC 21
OPERATION
DANGER:
Never cut near power lines, electric cords, or other electric sources.
If the bar and chain jams on any electrical cord or line, DO NOT TOUCH THE BAR,
CHAIN OR THE POLE! THEY CAN BECOME ELECTRICALLY LIVE AND MAY BE VERY
DANGEROUS. Continue to hold the pole saw by the insulated rear handle or lay it down
and away from you in a safe manner. Disconnect the electrical service to the damaged
line or cord before attempting to free the bar and chain from the line or cord. Contact
with the bar, chain, other conductive parts of the pole saw, or live electric cords or lines
will result in death by electrocution or serious injury.
WARNING:
Do not allow familiarity with this product to make you careless.
Remember that a careless fraction of a second is sufcient to inict serious injury.
WARNING:
Always wear safety goggles or safety glasses with side shield
marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown
into your eyes and other possible serious injuries.
WARNING:
Always remove the battery pack from the product when you are
assembling parts, making adjustments, cleaning, or when not in use. Removing the
battery pack will prevent accidental starting that could cause serious personal injury.
WARNING:
Do not use any attachments or accessories not recommended by the
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
Before each use, inspect the entire product for damaged, missing, or loose parts such
as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts are replaced.
APPLICATIONS
You may use this product for the purposes listed below:
◾
Limbing
◾
Pruning
FILLING OIL TANK WITH BAR AND CHAIN LUBRICANT
WARNING:
Do not smoke or bring any re or ame near the oil or the pole saw.
Oil may spill and cause a re.
Loading ...
Loading ...
Loading ...