Loading ...
Loading ...
Loading ...
User Manual of E Series Network Speed Dome
© Hikvision
65
Chapter 6 Speed Dome Configuration
6.1 Configuring Network Settings
The functions vary depending on the models of speed dome.
6.1.1 Basic Settings
Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the speed dome over network.
IPv4 and IPv6 are both supported.
Steps:
1. Enter TCP/IP settings interface:
Configuration > Network > Basic Settings > TCP/IP
Figure 6-1 TCP/IP Settings
2. Configure the NIC settings, including the IPv4(IPv6) Address, IPv4(IPv6) Subnet Mask and
IPv4(IPv6) Default Gateway.
Loading ...
Loading ...
Loading ...