Loading ...
Loading ...
Loading ...
User Manual of E Series Network Speed Dome
© Hikvision
95
you can turn this function on. The time will be adjusted automatically when the Daylight Saving
Time (DST) comes.
Steps:
1. Enter the DST interface by Configuration > Advanced Configuration > System > DST
Figure 6-47 DST Settings
2. Check to enable the DST function.
3. Set the date of the DST period.
4. Click to save the settings.
Configuring RS-485
Purpose:
The RS-485 serial port is used to control the PTZ of the camera. The configuring of the PTZ
parameters should be done before you control the PTZ unit.
Steps:
1. Enter RS-485 Port Setting interface:
Configuration> Advanced Configuration> System > RS-485
Figure 6-48 RS-485 Settings
2. Set the RS-485 parameters and click to save the settings.
The Baud rate, PTZ Protocol and PTZ Address parameters of the speed dome should be exactly
the same as those of the control device.
Loading ...
Loading ...
Loading ...