Loading ...
Loading ...
Loading ...
Chapter 3 Client Operaons
You can turn on/o the monitor, switch input signal through the ScreenControl client.
3.1 Log into the Client
Before You Start
Obtain the ScreenControl
soware from CD-ROM, and install it.
Steps
1.
Double-click the client
soware shortcut to open it.
2.
Select Control Mode as serial port.
3.
Select Screen Type as LCD-D50/4K.
4.
Select User Name as guest.
5.
Click Login to log into the client
soware.
3.2
Congure Serial Port
The client controls the screen by connecng the serial port.
Steps
1.
Click System Conguraon → Serial Port Conguraon .
2.
Set Serial Port according to the actual circumstance.
3.
Select Buad Rate as 9600.
4.
Click Open to connect the serial port.
5.
Oponal: Click Close to disconnect the serial port.
3.3 Startup/Shutdown
You can turn on/o the monitors via the client.
Before You Start
Congure the serial port, and see Congure Serial Port for details.
Steps
1.
Open the Screen Control page.
2.
Hold the mouse to draw a rectangle to select one or mulple virtual screens.
3.
Turn
on/o the monitors.
-
Right click to select Startup/Shutdown.
-
Click
to turn o the monitors. Or click to turn on the monitors.
LCD Monitor User Manual
14
Loading ...
Loading ...