Loading ...
Loading ...
Loading ...
241
• Send a test e-mail lets you connect to the SMTP server and send a test email to the address you
set as the default.
• Disallow Address Input controls whether you can enter email addresses manually. When
enabled, you can only choose email addresses from an address book or directory service.
Note: Use the displayed keyboard to enter the addresses. Press the arrow buttons on the remote
control to highlight numbers or characters and press Enter to select them.
5. When you finish selecting settings, press the Menu button to exit the menus.
Parent topic: Selecting Whiteboard Settings
Selecting Settings for a Directory Server
You can select the settings for specifying a email directory server for your projector.
1. Press the Menu button on the remote control.
2. Select the Interactive menu and press Enter.
3. Select Directory and press Enter.
4. Select the following options as necessary:
• Directory Access Function specifies whether to search an active directory server for user names
and email addresses.
• LDAP Server let you enter the IP address or fully qualified domain name (FQDN) for the LDAP
server. You can enter up to 64 alphanumeric characters. Do not use spaces or the following
symbols: " * + , : ; < = > ? [ \ ] ` |. If you specify an FQDN, you must configure a DNS server.
Note: You cannot use the following IP addresses: 127.x.x.x, 192.0.2.x, or 224.0.0.0 to
255.255.255.255 (where x is a number from 0 to 255).
• Port Number lets you enter a port number for the LDAP server. The default port is 389. Specify
"3268" to search the global catalog.
• Authentication lets you set the type of authentication expected by the LDAP server. If you are
using Digest-MD5 or Simple authentication and the LDAP Server setting is set to an IP address,
you must enable reverse DNS lookup on the DNS server.
• User Name lets you enter a user name for the mail server. You can enter up to 64 alphanumeric
characters. Use one of the following methods when entering the user name with the domain
name: domain name\user name or user name@domain name. Do not use a colon (":") or spaces.
Loading ...
Loading ...
Loading ...