Loading ...
Loading ...
Loading ...
216
The projector automatically detects which touch unit model is connected and displays the
instructions for that model. The instructions shown here are for the ELPFT01 touch unit.
4. Select the option for the Touch Unit installation method that was used and press Enter.
5. If you are using the Touch Unit Bracket, turn the adjustment screw on the bracket counterclockwise
until it stops.
6. Attach the two markers to the positions shown on the projected screen making sure the thinner ends
of the markers are facing the Touch Unit.
Note: Do not place anything other than the markers near the projected image during angle
adjustment. If other objects are on or near the projected image, angle adjustment may not be
performed correctly.
7. Move each marker over the projected cross until the lines of the cross align with the lines on the
marker. Make sure to match the positions so that the crosses overlap with the points on the marker
positions.
Note: If the magnets won't attach to the screen completely, wipe the area to remove any dirt and try
again. For non-magnetic screens, use the supplied tape to secure the markers.
Loading ...
Loading ...
Loading ...